Quick Installation Guide
1420 Wireless Gateway
STEP 3: BASIC ETHERNET OR SERIAL CONFIGURATION
To configure the 1420 for an Ethernet Network:
Table 2: Ethernet Communication Settings on page 15 is available to assist in recording the necessary information.
1.Determine 1420 Ethernet Port for connecting to Ethernet Network If using a wired connection, use Port 1 (P1)
IT/Process Control Network Administrator or Technician can provide the following:
a.1420 fixed IP Address or DHCP Host Name
b.Netmask (Subnet Mask)
c.Gateway
BEST PRACTICE:
Keep these values in a secure location not accessible by unauthorized personnel.
2.Configure 1420 Ethernet IP settings
a.Access the 1420 with Administrator access
b.Navigate to Setup>Internet Protocol>Address
c.Enter configuration information determined above
3.To complete configuration without a firewall, click Submit and proceed with 1420 Restart when prompted.
8
