Front Panel Layout, Professional Power Amplifier Features

•Audiophile quality power amplif er

•Full Range or Subwoofer Only Capabilities

•Adjustable Active Subwoofer Crossover, variable from 50-150Hz, 18dB/oct.

•Bridgeable in Full Range and Low Pass Mode

•75 Watts x 2 into 4 Ohms

•150 Watts x 1 into 8 Ohms (Bridged Configuration

•Gold Plated RCA inputs and “Pass Thru” outputs

•“Daisy Chain” capability with a single 2 channel input

•Thermal, Short Circuit, and Overload Protection Circuits

•Signal sensing auto turn-on and soft touch front panel power switch

•Silent turn on/off - No audible transients

•THD less than .01%, 20Hz-20kHz with 80kHz measurement bandwidth

•Signal to Noise Ratio >100dB

• IEC power inlet, 120 VAC (configurable to 230 AC)

Front Panel Layout

Level Control

This adjusts the output on the BPA-1 to match the speakers connected with other speakers in the sys- tem.

Power Switch

This manually turns on the BPA-1. In the “Auto” mode, this remains on by the amp will be in standby mode until an audio signal is sensed.

LEVEL

POWER

Page 8