Emotiva pmn manual Rear Panel Layout

Rear Panel Layout

Cooling Fan

Thermally controlled cooling fan runs according to the amplifier’s thermal condition for the quietest operation.

Crossover Frequency

In the LOWPASS mode, this control adjusts the cross- over point between 50Hz- 150Hz. See pages 10-11 for details.

Crossover Switch

Set the switch LOWPASS for use with a subwoofer or FLAT for full range (20Hz- 20KHz) operation. See pages 10-11 for details.

Power Plug

IEC 120VAC/60Hz. Can be converted to 230VAC/50Hz. Contact Emotiva for details.

Mono/Stereo Switch Set the switch to Stereo

for 2 channel operation or

MONO for bridged opera- tion. See pages 10-11 for details.

Speaker Output Terminals 5 way binding posts for left and right channels. Bridged configuration is Left + and Right -. See page 10 for details.

RCA Inputs and Outputs 2 Channel inputs and non buffered outputs. For ap- plication on bridging input or pass through output, see pages 10-11 for details.

Auto ON Switch

In the ON Mode, the front panel switch of the BPA-1 is used to turn on the amplifier.

In the AUTO Mode, the front panel switch of the BPA-1 remains on and the amplifier “wakes up” with the pres- ence of an audio signal.

Stereo Configuration Bridged Configuration

Page 9