LIGHTING INSTRUCTIONS

FOR YOUR SAFETY READ BEFORE LIGHTING

WARNING: If you do not follow these instructions exactly, a fire or explosion may result

causing property damage, personal injury or loss of life.

A.This appliance has a pilot which must be lighted by hand. When lighting the pilot, follow these instructions exactly.

B.BEFORE LIGHTING smell all around the appliance area for gas. Be sure to smell next to the floor because some gas is heavier than air and will settle on the floor.

WHAT TO DO IF YOU SMELL GAS

•Do not try to light any appliance.

•Do not touch any electrical switch;

do not use any phone in your building.

•Immediately call your gas supplier from a neigh- bor's phone. Follow the gas supplier's instructions.

•If you cannot reach your gas supplier, call the fire department.

C.Use only your hand to push in or turn the gas control knob. Never use tools. If the knob will not push in or turn by hand, don't try to repair it; call a qualified service technician. Force or attempted repair may result in a fire or explosion.

D.Do not use this appliance if any part has been under water. Immediately call a qualified service techni- cian to inspect the appliance and to replace any part of the control system and any gas control which has been under water.

LIGHTING INSTRUCTIONS

1.STOP! Read the safety information above.

2.Set the thermostat (gas control knob) to lowest setting.

3.Turn off all electric power to the appliance (if appli- cable).

4.Remove front panel.

5.Push in gas control knob slightly and turn clockwise to "OFF".

6.Wait ten (10) minutes to clear out any gas. Then smell for gas, including near the floor. If you smell gas, STOP! Follow "B" in the safety information above. If you don't smell gas, go to the next step.

7.Find pilot - follow metal tube from gas control. The pilot is attached to the main burner which is located at bottom of combustion chamber.

8.Turn knob on gas control counterclockwise to "PILOT."

9.Push in gas control knob all the way and hold in. Repeatedly push the piezo ignitor button until

pilot is lit (or use a match to light pilot). Continue to hold the control knob in for about one (1) minute after the pilot is lit. Release knob and it will pop back up. Pilot should remain lit. If it goes out, repeat steps 5 through 9.

•If knob does not pop up when released, stop and immediately call your service technician or gas supplier.

•If the pilot will not stay lit after several tries, turn the gas control knob to "OFF" and call your service technician or gas supplier.

10.Attention! Gas control has an INTERLOCK latching device. When the pilot is initially lit and the safety magnet is energized (pilot stays "ON") the INTER- LOCK latching device becomes operative. If the gas control is turned to the "OFF" position or gas flow to the appliance is shut off, the pilot cannot be relighted until the safety magnet is de-energized (approxi- mately 60 seconds). There will be an audible "click" when the safety magnet in the gas control is de- energized. Pilot can now be relighted. Repeat steps 5 through 9.

11.Turn gas control knob counterclockwise to "HI"

12.Replace front panel.

13.Turn on all electric power to the appliance (if appli- cable).

14.Set thermostat (gas control knob) to desired setting from "HI" to "LO".

TO TURN OFF GAS TO APPLIANCE

1.Set the thermostat (gas control knob) to lowest setting.

2.Turn off all electric power to appliance if service is to be performed (if applicable).

3Push in gas control knob slightly and turn clock-

wise to "OFF". Do not force.

Page 10

R-2688

Page 9 Page 11
Page 10
Image 10
Empire Products EE-25-2 installation instructions Lighting Instructions, For Your Safety Read Before Lighting
Page 9 Page 11

EE-25-2 specifications

The Empire Products EE-25-2 is a versatile and robust piece of equipment designed for a variety of applications in industrial and commercial settings. Notable for its efficiency and performance, this model stands out in the marketplace due to its array of features and cutting-edge technologies that cater to the needs of modern industries.

One of the primary characteristics of the EE-25-2 is its powerful operational capacity. With a significant output capability, it is engineered to handle demanding workloads while maintaining high standards of performance. This makes it suitable for diverse operations, from manufacturing processes to large-scale assembly tasks.

The EE-25-2 is equipped with advanced control systems that enhance user experience and operational efficiency. Its intuitive interface allows for easy programming and monitoring, enabling operators to adjust settings and access critical data in real-time. This feature significantly reduces downtime and improves overall productivity, ensuring that businesses can meet their targets with ease.

Another key feature of the Empire Products EE-25-2 is its energy-efficient design. The equipment incorporates state-of-the-art technologies that minimize energy consumption without compromising on performance. This not only leads to cost savings for users but also aligns with environmentally friendly practices, making it an attractive option for businesses looking to reduce their carbon footprint.

The durability and reliability of the EE-25-2 are evident in its robust construction. Built with high-quality materials, it is designed to withstand the rigors of daily operations in challenging environments. Its resilience ensures that maintenance costs are kept to a minimum, and the longevity of the equipment is maximized.

Additionally, the EE-25-2 features an array of safety mechanisms that protect both the operator and the equipment. These include emergency stop functions, overload protection, and safety guards, which comply with industry standards and promote a secure working environment.

One of the standout characteristics of the EE-25-2 is its versatility. It can be customized with various attachments and tools, making it adaptable to different tasks and applications. This flexibility means that it can seamlessly integrate into existing workflows, providing businesses with the ability to pivot and adjust to changing demands.

In conclusion, the Empire Products EE-25-2 is a powerful and efficient piece of equipment with a host of features designed for modern industrial applications. With its advanced technologies, energy efficiency, durability, and safety mechanisms, it is a reliable choice for businesses looking to enhance productivity while maintaining a commitment to safety and sustainability.
Top Page Image Contents