Emprex PC320 manual Operating System Requirements, Hardware Installation, Snap Size Adjustment

PC320

Web Cam

User’s Guide

Version 1.0

For Notebook, LCD panel monitor

Operating System Requirements

Windows 98SE, Windows Me, Windows 2000, Windows XP, Windows Vista™

Driver Software Installation

Attention:

Make sure to install driver and software BEFORE plugging the camera into USB port.

1.Insert the software CD into the CD-ROM drive of your computer.

2.The installation program will run automatically. If the installation does not auto play, please run “autorun.exe” from the CD-ROM’s root directory to install.

separately “ArcSoft WebCam Companion” icon, and then follow the on-screen instruction to install the application software.

6.The wizard will install ArcSoft suite: four softwares at the same time.

7.After first time installation, the system will restart; there will be a new icon on the desktop.

8.Connect your WebCam to an available USB port on your computer. Windows should detect your new device.

Hardware Installation

1.Plug the enclosed USB cable into camera and USB port on the PC separately, and then follow the on-screen instructions to install the hardware. To avoid low voltage, we recommend the user to plug the cable connector to USB port on PC directly.

2.Once pressing the snap shot button, the LED indicator on camera will light up and the “AMCAP” dialog box will pop up while the installation is successful.

3.Please select AMCAP and enable “preview function” to view the video after first-time installation. If there is no video shown, please remove and connect again to make sure the USB connection is completed.

Notice:

Please download the latest update of “Service Pack” (from Start Windows Update) to keep the camera running smoothly.

Attention:

If you have more than one image device in your system, please select the CamMaestro as the PC Camera device. In this way, you can use this camera to capture images.

Power Source Adjustment

Choose the mode of “50Hz” or “60Hz” according to your power source environment or video output signal system to avoid the blurry image.

Amcap Option Video Capture Filter

OK

2.When the “Properties” dialog box pops up, please select “VGA SnapSize” and click mouse button to choose the VGA snap size you need. There are four selections

as below:
0: 640 * 480	1: 800 * 600
2: 1024 * 768	3: 1280 * 1024

3.Under Windows® 98SE/ME/2000/XP operating system, move the mouse cursor to any empty space on the screen. Right click the mouse button and select “Properties” to pop up the “Display Properties” dialog box. Please select “Settings” and then adjust the screen resolution to match the “VGA SnapSize” you selected before.

4.Under Windows Vista™ operating system, move the mouse cursor to any empty space on the screen. Right click the mouse button and select “Personalize” to pop up the “Display Settings” dialog box. Please select “Monitor” and then adjust the screen resolution to match the “VGA SnapSize” you selected before.

3.Click the “Web Camera Driver” icon to install device drivers.

4.Click “DirectX-Update” to install DirectX (9.0C) if you use old version or never installed before.

5.After driver installation, please click

Snap Size Adjustment

1.Press the snap shot button on camera to pop up the “AMCAP” dialog box. Please select “Option” and then click “Video Capture Filter” to continue.

3100553661 Version 1.0 Mar. 2007