STANDARDS
Fibre Channel Protocols:
FC-AL, FC-AL2, FC-PH, FC-PH2, FC-PH3, FC-PI,
FC-PLDA, FCP
Interoperability:
connects to any FC_AL compliant device and any
vendors fabric via FL_Port
ARCHITECTURE
Fibre Channel Ports:
12
Physical Interface:
hot–pluggable industry–standard optical
SFP transceivers at all ports
Scalability:
up to 8 switches and 126 devices
1Trunking:
automatic trunking fully multiplies
inter–switch bandwidth with failover pathing
and device prioritization
Zoning:
one–step zoning is port– or ALPA–based
overlapping and port–based non–overlapping
Stability:
Stealth Intelligent Change Manager
automatically eliminates state and
configuration change notification disruptions—
zone and port–based management
Integration:
Emulex InSpeed SOC 320 with integrated SERDES
Redundancy:
resident backup firmware copy
PERFORMANCE
Port Speed:
2.125 or 1.0625 Gb/s bi–directional
(400MBps per port, full duplex)
Switch Latency:
less than 1µSec with no contention, cut–through
routing at 2Gb/s
Performance:
full wire–speed switching
Aggregate Bandwidth: 48Gb/s
Switch Core:
non–blocking Crossbar switch core dynamically
delivers multiple concurrent port–port connections
1Fairness & Prioritization:
ensures all devices have guaranteed access to all
other devices, or explicitly have prioritized access
PHYSICAL ATTRIBUTES
Dimensions:
8.5”w x 1.57”h x 16”d
(21.6cm x 4cm x 40.6cm)
half–rack width, 1U height
Weight:
7.0 lbs (3.2 kg)
Mounting:
rack mount or tabletop
MANAGEMENT
Standard Management Software:
Intuitive Integrated Management Web Server
with Smart Settings
Access:
TELNET, http Web Server, SNMP MIB
Physical Interface:
10BaseT Ethernet (RJ-45), RS-232 serial port
DIAGNOSTICS
Continuous Diagnostic Operations:
power on self test, port test before insertion, traf-
fic & utilization monitoring, continuous link health
monitoring, clock delta monitoring, pinpoint
detection of drive problems, trend monitoring of
device behavior, preventative action before failure,
automatic bypass for rogue and unused ports
Diagnostic Troubleshooting Tools:
CRC error monitoring & counting, ordered set
detectors, counters on every port, ordered set
capture, ordered set transmit
POWER REQUIREMENTS
Nominal:
universal auto–sensing 100-240 VAC, 50/60 Hz,
0.5-0.3 amps
ENVIRONMENTAL CONDITIONS
Operating Temperature: 0° to 40° C
Storage Temperature: -40° to 80° C
Humidity: 5-95% non–condensing
Operating Altitude: up to 15,000 feet
Storage Altitude: up to 35,000 feet
Operating Shock: 5g, 11ms 1/2 sine
Storage Shock: 30g, 11ms 1/2 sine
Operating Sine Vibration: 1g, 5-500 Hz
Operating Random Vibration: ISTA 2A
2AGENCY APPROVALS
United States:
Safety: NRTL, EMC: FCC Class A
Canada:
Safety: NRTL, EMC: ICES-003 Class A
Europe:
Safety: EN60950, EMC: EN55022, EN55024, CE
Japan:
Safety: IEC60950, EMC: VCCI Class A
Australia:
Safety: AS/NZS 3260, EMC: AS/NZS 3548, Class A
International:
Safety: IEC60950, EMC: CISPR22, CISPR24
OPTIONS & ACCESSORIES
The base model 350 ships with a US power cord,
serial cable and Quick Install Card. The Users
Guide is available for download through a weblink
within the embedded web management interface.
Rack mount kit and SFP transceivers are sold
separately.
This document refers to various companies and products by their trade
names. In most, if not all cases, their respective companies claim these
designations as trademarks or registered trademarks. This information
is provided for reference only. Although this information is believed to
be accurate and reliable at the time of publication, Emulex assumes no
responsibility for errors or omissions. Emulex reserves the right to make
changes or corrections without notice.

SPECIFICATIONS

Model 350
InSpeed™
Embedded Storage Switch

www.emulex.com

04-195 1/04
Corporate HQ 3535 Harbor Blvd Costa Mesa CA 92626 714 662.5600 | Wokingham U.K. (44) 118 977 2929 | Paris France (33) 41 91 19 90
1 Patent pending
2 All agency approvals given with optical SFPs only