26
5.3 Spanning Tree Setting
This page allows you to modify the Spanning Tree settings. Enabling Spanning Tree protocol will prevent network loops in your LAN network.
Spanning Tree
Spanning Tree Status | Enable or disable the Spanning Tree function. |
|
|
Bridge Hello Time | Specify Bridge Hello Time in seconds. This value determines how often EAP350 sends hello |
| packets and communicate information about the topology throughout the entire Bridged Local |
| Area Network. |
|
|
Bridge Max Age | Specify Bridge Max Age in seconds. If another bridge in the spanning tree does not send a hello |
| packet for a long period of time, it is assumed to be dead. |
|
|
Bridge Forward Delay | Specify Bridge Forward Delay in seconds. Forwarding Delay time is the time spent in each of the |
| Listening and Learning states prior the Forwarding state was entered. This delay is provided so |
| that when a new bridge comes on to a busy network, it looks at traffic info before participating. |
|
|
