Enterasys Matrix DFE-Gold Series Modules Hardware Installation Guide 2-1
2
Network RequirementsBeforeinstallingthemodule,reviewtherequirementsandspecificationsreferredtoin
thischapterconcerningthefollowing:
•10BASE‐TNetwork(page2‐1)
•100BASE‐TXNetwork(page 2‐2)
•100BASE‐FXFiber‐OpticNetwork(page2 ‐2)
Thenetworkinstallationmustmeettherequirementstoensuresatisfactoryperformance
ofthisequipment.Failuretodosowillproducepoornetworkperformance.
10BASE-T Network
Whenconnectinga10BASE‐Tsegmenttoanyofthemodulefixedfrontpanelportsofthe
4H4282‐49, 4H4283‐49,4H4203‐72,and4H4202‐72, ensurethatthenetworkmeetsthe
EthernetnetworkrequirementsoftheIEEE802.3‐2002standardfor10BASE‐T.Refertothe
CablingGuidefordetails.
Note: The Enterasys Matrix DFE-Gold Series Configuration Guide and the Cabling Guide
referred to in the following sections can be found on the Enterasys Networks World Wide
Web site: http://www.enterasys.com/support/manuals.
Refer to “Related Documents” on page xvi for more information.
Note: If a port is to operate at 100Mbps, Category 5 cabling must be used. Category 3
cabling does not meet 100 Mbps specifications. For 10 Mbps operation only, Category 3 or
Category 5 cabling can be used. Refer to “100BASE-TX Network” on page 2-2 for
information about 100BASE-TX networks and cabling.