Panasonic PT-D6000U manual Troubleshooting

Troubleshooting

Should any problem persist, contact your dealer.
Problem	Cause	Reference
		page*1
	The power cord may not be connected.	18
	The POWER switch is turned off.	20
Power does not turn on.	No electric supply is at the wall outlet.	20
	TEMP indicator is lit or flashes.	28
	LAMP1/LAMP2 indicator is lit or flashes.	28
	The lamp unit cover has not been securely installed.	31
	The circuit breakers have tripped.	-
	The video signal input source may not be connected to a terminal	CD-ROM
	properly.
No picture appears.	The input selection setting may not be correct.	22
	The BRIGHTNESS adjustment setting may be at the minimum setting.	CD-ROM
	The input source which is connected to the projector may have a
	problem.
	The shutter function may be in use.	22
	The lens focus may not have been set correctly.	19
The picture is fuzzy.	The projector may not be at the correct distance from the screen.	CD-ROM
	The lens may be dirty.	-
	The projector may be tilted too much.	CD-ROM
	COLOR or TINT adjustment may be incorrect.	CD-ROM
The color is pale or grayish.	The input source which is connected to the projector may not be	-
	adjusted correctly.
	RGB cable is damaged.	-
The control buttons of the	CONTROL PANEL of CONTROL DEVICE SETUP in SECURITY
	menu is disabled. If you have a loss of the remote control while the	CD-ROM
projector do not operate.	CONTROL PANEL is disabled, press and hold the MENU button for
	2 seconds with pressing the ENTER button.
	REMOTE CONTROLLER of CONTROL DEVICE SETUP in	CD-ROM
	SECURITY menu is disabled.	-
	The batteries may be weak.
The remote control does	The batteries may not have been inserted correctly.	14
not operate.	The remote control signal receptor on the projector may be	21
	obstructed.	21
	The remote control unit may be out of the operation range.
	Strong light such as fluorescent shine onto the signal receptor.	-
	The remote control ID setting is incorrect.	CD-ROM
The picture does not	The color format may not have been set correctly.	CD-ROM
	There may be a problem with the VCR or other signal source.	-
display correctly.
	A signal which is not compatible with the projector is being input.	34
	The cable may be longer than the optional cable.	-
Picture from a computer	The external video output from a laptop computer may not be correct.	-
	(You may be able to change the external output settings by pressing	CD-ROM	Maintenance
DVI-D graphic board does	DVI-D IN setting in DISPLAY OPTION menu may be incorrect setting.
does not appear.	the [Fn] + [F3] or [Fn] + [F10] keys simultaneously. The actual method
	varies depending on the type of computer; refer to the documentation
	provided with your computer for further details.)
	The graphic board driver of the computer needs to be updated to the	-
Picture from a computer	latest version.
not appear.	The computer may need to be restarted after switching DVI-D IN	-
	setting in DISPLAY OPTION menu of the projector correctly.

*1. CD-ROM: See the functional instructions in the provided CD-ROM.

ENGLISH - 33