Setting the Mode Switches
B-2 Mode Switch Bank Settings and Optional Installations
Setting the Mode Switches
Figure B1andFigureB2showthelocationofthemodeswitchesandtheswitchsettings
fornormaloperation.Theseswitchesaresetatthefactorytotheoffpositionandrarely
needtobechanged.
Switchdefinitionsandpositionsareasfollows:
•Switches1through6ForEnterasysNetworksuseonly.
•Switch7ClearPersistentData.ChangingthepositionofthisswitchclearsPersist ent
Dataonthenextpowerupofthemodule.Alluserenteredparameters,suchastheIP
address,modulenames,etc.,areresettothefactorydefaultsettings.Oncethemodule
resets,youcaneitherusethefactorydefaultsettingsorreenteryourownparameters.
•Switch8ClearAdminPassword.Changingthepositionofthisswitch clearsthe
adminpassword,andrestoresthefactorydefaultpasswordonthenextpowerupof
themodule.Oncethemoduleresets,youcaneitherusethefactorydefaultsettingsor
reenteryourownpassword.
Caution: Read the appropriate sections to be fully aware of the consequences when
changing switch settings.
Only qualified personnel should change switch settings.
Precaución: Si desea modificar la configuración del interruptor, lea las secciones
correspondientes para saber cuál será el resultado de hacerlo.
Estas modificaciones a la configuración sólo debe realizarlas personal calificado.
Note: Do not change the position of Switch 8 unless it is necessary to reset the admin
password to its factory default setting.