Using LANVIEW
Table 4-1 LANVIEW LEDs (Continued)
LED | Color | State | Recommended Action |
|
|
|
|
TX | Off | Port enabled, and no |
(Transmit) |
| activity. If STA is |
|
| enabled and there is a |
|
| valid link, this led should |
|
| flash green every two |
|
| seconds indicating that |
|
| BPDUs are being sent. |
Ensure that the STA is enabled and that there is a valid link.
Contact Enterasys Networks for technical support.
| Green | Flashing. Indicates | None. |
|
| activity. Rate indicates |
|
|
| data rate. |
|
|
|
|
|
| Amber | Blinking. Port in | Ensure that the port is not disabled. |
|
| standby. The port may be | Contact Enterasys Networks for technical |
|
| disabled due to Spanning | |
|
| support. | |
|
| Tree. | |
|
|
| |
|
|
|
|
| Red | Flashing. Indicates | None, unless there is a high amount of |
|
| collision rate. | activity. In this case, check for network |
|
|
| configuration problems or a defective |
|
|
| device. |
|
|
|
|
|
| Solid. Diagnostic failure. | Contact Enterasys Networks for technical |
|
|
| support. |
|
|
|
|
