The VH-8TX1UM/VH-8TX1MF switch is desktop mountable. LEDs on the front panel provide information about the operating status of the switch. The rear panel contains the power connector and serial console port.
Features
•Ports:
-7 fixed dual-speed 10/100Base-TX ports using RJ-45 connectors (MDI-X)
-1 port which can be selected between dual-speed 10/100Base-TX and 100Base-FX multi-mode or single-mode fiber
-1 serial console port
•Switch Architecture:
-1 controller with 8 10/100 ports
-IEEE 802.3u auto-negotiation of half/full-duplex operation on all RJ-45 ports
-128 KB packet buffering for 10/100 ports
-Store-and-forward switching
-8K address forwarding table
-Forwarding: 14,880 packets-per-second (64 byte packets) @10 Mbps; 148,800 pps @100 Mbps; 1,488,000 pps
-Filtering: 14,880 packets-per-second (64 byte packets) @10 Mbps; 148,800 pps @100 Mbps; 1,488,000 pps
-SNMP compliant agent: MIB II (RFC 1213); Bridge MIB (RFC 1493); Ethernet-like MIB (RFC 1643); RMON - Statistics, History, Alarm and Event groups (RFC 1757); Interface Evolution MIB (RFC 1573); Q-MIB (IEEE 802.1Q); private MIB extensions
-Access via in-band, Internet browser, or Telnet
-Console port (RS-232, male DB-9 connector) supports access via direct or modem connection
-BootP for IP address configuration
•Software:
-Diagnostics for product testing and troubleshooting
-Firmware upgrades using the console port or in-band with
TFTP
•LED Indicators:
-System: Power
-10Base-T/100Base-TX ports: link/speed/disable, mode (flow control, full duplex, activity)
