Enviro EF4 owner manual Freestanding Pedestal

Installation

PEDESTAL INSTALLATION - FREESTANDING:

The freestanding model comes with a pedestal that has to be attached prior to installation:

•Remove the pedestal from the box

•Remove the unit from the box

•Place the unit on its back on the pallet.

•Back the four (4) screws in the base off three (3) to four (4) full turns.

•Align the keyholes in the pedestal with the screws, lock into place.

•Secure the two (2) pieces by tightening the four

(4) screws from the inside of the pedestal.

PEDESTAL INSTALLATION - FIREPLACE INSERT:

������� ���� ���

������ �����

Figure 11: Freestanding Pedestal.

The pedestal for the fireplace insert is packaged in the hopper of the appliance. Secure the leveling (Z- style) bracket onto the back two (2) pedestal mounting screws with the inserted nuts facing up. Insert leveling legs into the nuts on the Z bracket if necessary.

Place the front portion of the pedestal into the front pedestal screws; there are two slots in the pedestal that fit over these screws. Finish securing the pedestal using the four (4) T-20 Torx screws provided. This will cover and seal the ash pan hole in the bottom of the firebox inside the appliance.

�������� ����

������ ��������� ������ ����

������ ���� ����

������ ����

Figure 12: Fireplace Insert Pedestal and Leveling Legs.

14