Installation
OUTSIDE
Outside fresh air is mandatory when installing this unit in airtight homes and mobile homes.
When connecting to an outside fresh air source, do not use plastic or combustible pipe. Only 15⁄8” minimum (42 mm) ID (inside diameter) steel, aluminum or copper pipe should be used. It is recommended, when you are installing a fresh air system, to keep the number of bends in the pipe to a minimum.
�������
����
����� ��
��� ���
��������
�����
EXHAUST AND FRESH AIR INTAKE LOCATIONS:
Figure 14: Outside Air Connection.
EXHAUST | Freestanding | Insert |
| ||
Base to center of flue | 15 1⁄4” | (38.8 cm) | 7 | 7⁄8” | (20.0 cm) |
Side to center of flue | 5 7⁄8” | (14.8 cm) | 5 | 3⁄4” | (14.6 cm) |
Center of unit to center of flue | 5 3/16” | (13.2 cm) | 5 | 3/16” | (13.2 cm) |
FRESH AIR INTAKE. |
|
|
|
|
|
Base to center of intake | 10 1⁄8” | (25.9 cm) | 2 | 15/16” | (7.4 cm) |
Side to center of intake | 8” | (20.2 cm) | 8 | 1/16” | (20.5 cm) |
Center of unit to center of flue | 3 1/16” | (7.8 cm) | 3 | 1/16” | (7.8 cm) |
INSTALL VENT AT CLEARANCES SPECIFIED BY THE VENTING MANUFACTURER
� ����� |
|
�������� |
|
| �� ���� |
| �������� |
| �� ���� |
| �������� |
| � ���� |
| �������� |
� ����� | �� |
������� | �������� |
Figure 15: EF4 Freestanding Inlet and Outlet Location. | |
16 |
|
� ����� |
|
|
�������� |
|
|
|
| � ���� |
|
| ������ |
|
| � ������ |
|
| ������� |
|
| � ���� |
� ����� | � ����� | �������� |
| ||
������� | �������� |
|
