Operating Instructions
DOS-mode
This feature allows you to choose between resolutions of 720 x 400 or 640 x 400 while working in
How to Optimize the DOS-mode
1.Insert the Windows 95/98/2000/ME INF Driver Disk into your floppy drive.
2.Open Windows Explorer to search on the floppy drive (Drive A:) to find the Dos1.exe file.
3.
4.Expand the picture to full screen by pressing the icon on the top of window. If there is no icon, the picture is already at full screen.
If you don't have the driver disk:
1.Choose Start / Programs /
2.Type C:\> EDIT and press Enter. You will be in the
3.Press the AUTO button on the front of your monitor for 2 seconds. The screen will be automatically adjusted.
If the screen is distorted (for example: the picture can't go to full screen, the background of white
pattern has vertical stripe noise, or the characters are twisted):
1.Change the resolution to 640 x 400
2.Press the Power button off and then on.
3.Press the AUTO button for 2 seconds. Note: the above procedure must process in
To exit, press the ESC key or press
Plug & Play DDC1/2B Feature
This monitor is equipped with VESA DDC1/2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities. The communication channel is defined in two levels, DDC1 and DDC2B.
The DDC1 is a unidirectional data channel from the display to the host that continuously transmits EDID information. The DDC2B is a bidirectional data channel based on the I²C protocol. The host can request EDID information over the DDC2B.
12 | v1_090802 | |
|
