Envision Peripherals EN-7100S Install An Optional Wall Mounting Arm Not supplied, EN-7100s

Before You Operate the Monitor

EN-7100s

Install An Optional Wall Mounting Arm (Not supplied)

Follow these steps to finish installing the wall mounting arm:

1.Place the wall mounting arm onto the back of the monitor. Line up the holes of the arm with the holes in the back of the monitor.

2.Insert the 4 screws into the holes and tighten.

3.Insert the power cable into the slot on the back of the monitor.

The Envisionl EN-7100s is compatible with the Ergotron line of mounting and arm solutions.

Contact Ergotron at 800-888-8458 or visit their web site at www.ergotron.com for more information on the many ways on which you can mount your Envision LCD monitor.

EN-7100s 8 v1_090802