EN-770e
631MY02
EN-770e
Before You Operate the Monitor

Connecting the WiresUsing the Power Cord Supplied

1. Connect the built-in video cable into the 15-pin
connector on the back of your computer and
tighten the two screws.
2. Connect the power cord into you r monitor's
powerinput socket.
3. Plug the other end of the power cord into a
grounded AC outlet or UL-approved power strip.
Caution:Make sure thepower cord is thecorrect
type that is required in your area. Thism onitor
has a universal power supply that allows
operation in either 100/120V AC or 220/240V AC
voltage areas (no user adjustment is required).
If the AC outlet is not grounded (with three
holes), install the proper grounding adapter (not
supplied).