■Select Photo Paper as the Media Type setting.

■To keep your printouts looking their best, store them in a resealable plastic bag or other airtight covering and protect them from heat, humidity, and direct sunlight. Return unused paper to the original package as soon as you finish printing.

If you’re using letter-size or A4-size Photo Paper, follow the instructions on page 14 to load and print on the paper. If you’re using 4 × 6-inch, Panoramic, or roll Photo Paper, see the next sections.

4 × 6-inch Photo Paper

EPSON 4 × 6-inch Photo Paper is micro-perforated around the edges so you can trim your printouts and “bleed” the photo—extend it to the edge of the paper—on all sides.

1.Load the paper against the right edge guide with the glossy side facing up and the perforated margins positioned as shown. Then slide the left edge guide against the paper.

You can load up to 20 sheets at a time, with the included support sheets A and B beneath the stack. (If you don’t have the support sheets, use plain paper cut to size.)

2.When you create the image in your application software, size it to 4.25 × 6.25 inches. Or use your printer software’s Reduce/Enlarge (Windows) or Fit to Page (Macintosh) settings, as described in your electronic Reference Guide.

3.Choose Photo Paper as the Media Type setting.

4.Choose Photo Paper 4 × 6 in as the Paper Size setting and Maximum as the Printable Area setting.

5.After you print your picture, fold the paper back and forth along the perforations and carefully tear off the margins.

bottom of printed image

trim size

printed image size

top of printed image

Remove the margins

32