2-16 Setting Up the Scanner
R4C448
Rev. C
A5 size CHAP2.FM
2/11/00 Pass 3
LProof Sign-off:
tanto name SEI Y.Takasaki M.Fujimori
leader name M.Fujimori
editor name SEI M.Kauppi

Power-off sequence

Keep the following in mind every time you turn off your
computer and SCSI devices.
❏When you are finished using your system, turn off your
computer first, then the scanner and other SCSI devices in
reverse order of the power-on sequence.
❏While using your computer, do not turn off any SCSI device
which has a terminator that is active (on).
❏Do not turn the scanner off and back on while using your
computer, otherwise the scanner may not work properly.
When the connection is complete, you need to install the scanner
software. See Chapter 3 of this guide.
Connecting the Scanner (USB) to Your Computer
Your PC must be preinstalled with Windows 98, and have a
working USB port.
Your Apple Macintosh G3 or iMac computer must be running
system 8.5 or later, or system 8.1 with iMac Update1.0 and have
a working USB port.
Note:
If you connect your scanner through more than one hub, your system
may not work properly. In this case, try connecting the scanner directly
to the computer’s USB port. Also, your system may not work properly
if you use a USB cable other than that supplied by EPSON.