Inverting and Mirroring the Image

If the image is displayed upside-down or backward, select the correct Projection option:

1.Press the Menu button on the remote control.

2.Use the menu navigation buttons to open the Setting

menu, then open the Screen menu, and then select

Projection.Menu

button

3. Choose from these options:

■Front if the projector is located in front of the screen (for example, on a table).

Menu

■ Front/Ceiling if the projector is located in front navigation

of the screen and mounted overhead.

buttons

■Rear if the projector is located behind the screen.

■Rear/Ceiling if the projector is located behind the screen and mounted overhead.

Selecting the Input Signal Setting

If you’re using the projector’s Input A port, select the correct setting for the type of video equipment you’ve connected to it:

1.Press the Menu button on the remote control.

2.Use the menu navigation buttons to open the Setting menu, then open the Input Signal menu, and then select Input A.

3.Choose from these options:

■YCbCr for a video player that outputs an NTSC signal.

■YPbPr for a video player that outputs an HDTV signal.

■RGB-Videoif your video player outputs an RGB video signal.

Note: Check the label next to the port on your video equipment, if you’re unsure which setting to use.

18