To use a memory setting you’ve saved on the projector:
Access the projector’s memory settings either from the remote control (see page 33) or by using Cinema Color Editor as follows:
1.Select Picture Quality, then click Memory management and choose Select.
1.Select
Picture Quality
3. Click
Select
2.Click Memory management
2.Click the tab where the setting you want to use is stored (Standard or Advance).
1.Select Standard or Advance
2.Select the setting you want to use
3.Click Select
3.Select the desired memory setting, then click Select. After a moment, your image appears on the screen using the selected setting.
47