Basic Operation
Make sure the projector is set up as described on page 13, then follow the instructions below to turn it on and display an image.
Turning On the Projector
1. Remove the lens cap.
2. Press the On button on the remote control, or press the | Turn on the projector |
Power button on the projector. |
|
Note: If this is your first time using the remote control, make sure batteries are installed as described on page 50.
To keep children from turning on the projector, you can use the projector’s Child Lock (see page 25).
The projector takes about 30 seconds to warm up and display an image. If you don’t see a picture, you may need to change the image source as described on the next page.
21