Customizing Projector Features

Use the settings in this section to adjust the image size and position, suppress on-screen text, and select basic setup options.

Image Sizing

Before adjusting any of these settings, make sure you have already selected an appropriate aspect ratio for the type of picture you’re viewing (see page 23).

■Output Scaling

Setting ! Advanced ! Output Scaling

For standard video formats, this setting lets you see the edges of the image that are not normally visible in the picture. Select Larger to view component video and RGB video at 100% size; composite video and S-video formats are shown at 95%. (Normal displays images at 92% size.)

For analog-RGB computer signals, select Smaller to show a slightly reduced image if you see interference at the top or bottom of the screen. (Normal displays images at 100%.)

■Position

Setting ! Screen ! Position

Use the arrow buttons to fine-tune the position of the image on the screen.

■Zoom Caption

Setting ! Screen ! Zoom Caption

Lets you adjust the shape and position of the image so that subtitles are visible (available only if the aspect ratio has been set to Zoom). Use Vertical Size to adjust the proportions of the image, and Zoom Position to move the image up or down.

35