Introduction 1
HP289
1. Introduction
The Model 214D-1 Batch Controller accepts pulse or frequency flow
signals and automatically controls the batching of fluids via a one or
two stage control valve.
The instrument is extremely flexible and easy to operate, with a four
key front panel operation that enables the batch quantity to be set and
batches to be started or stopped.
This manual covers the Model 214D-1 which accepts most frequency
and pulse signals, including mV outputs from turbine flowmeters, and 2
wire proximity switch outputs. It also allows all four front panel
switches to be remotely connected via the rear panel terminal strip.
The instrument is fully configurable, with all calculation constants set
via the front panel switches and stored permanently in a non-volatile
memory.
This instrument conforms to the EMC-Directive of the Council of
European Communities 89/336/EEC and the following standards:
Generic Emission Standard EN 50081-1 Residential, Commercial &
Light Industry Environment.
Generic Emission Standard EN 50081-2 Industrial Environment.
Generic Immunity Standard EN 50082-1 Residential, Commercial &
Light Industry Environment.
Generic Immunity Standard EN 50082-2 Industrial Environment.
In order to comply with these standards, the wiring instructions in
Section 7 must be followed.