Epson 2170 - page 117

10. Highlight the modeby moving the cursor withthe ↑or ↓key, andthen print thecurrent Bi-d
printalignment pattern for that mode by pressingSPACE.
11. If the Bi-dpattern is not aligned properly, adjustit by changing thevalue with the←or →key.
Ifthe second row is shiftedto the rightof the firstrow, change the valueby pressing the ←key,
and printthe newBi-d print alignmentpattern by pressing SPACE. If thesecond row is shifted to
theleft of the first row, changethe value bypressing the →key,and print the new Bi-d print
alignmentpatt ern bypressing SPACE. Performthis operation for each mode (0, 1, and2).
12. When the Bi-dprint alignmentis correct for each print mode,press ENTER to write the
adjusted valuesto theEEPROM and printthe adjusted valuefor each mode. This operation
returns theprogram to theMain Menu automatically.
13. To exit this program, pressESC until thecomputer returns to theMS-DOS prompt.
The factory settings are written to the EEPROM when you run one of the the check programs,
shown in the Main Menu. Afteryou select the factory settings, be sure to run the check program.
< Bi-d adjustment >
> Mode 0 = 0
Mode 1 = 0
Mode 2 = 0
Cancel Print Speed Value Write Default
[ ESC ] [ SPACE ] [ ] [ ] [ RET ] [ HOME ]
Figure 4-8 Bi-d Adjustment Menu
Mode 0 VR0 = 0
HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
Figure 4-9 Current Bi-d PrintAlignment
FX-2170 Service Manual Adjustment
Rev. A 4-5