7-10 Troubleshooting
R4C4620
Rev. C
A5 size TRBLE.FM
6/14/00 Pass 3
LProof Sign-off:
SEI Y.Ohkawara T.Takahashi
T.Takahashi
SEI M.Kauppi K.Blair
Wrong tear-off positionThe printer prints on (or too far away from) the perforation of
your continuous paper.
Cause What to do
The tear-off position setting
is incorrect.
Adjust the tear-off position using the
micro adjust feature. See “Adjusting
the tear-off position” on page 2-35.
You moved the paper using
the knob while the printer
was on.
Adjust the tear-off position using the
micro adjust feature. See “Adjusting
the tear-off position” on page 2-35.
cCaution:
Never use the knob to adjust the tear-off position; this may damage the
printer or cause it to lose the tear-off position.
The printer you want to use
is not selected in your
software.
Choose the correct printer from the
Windows desktop or in your
application before printing.
The paper size setting in
your application or printer
driver does not match the
size of the paper you are
using.
Check the paper size setting in your
application or printer driver.
The printer’s page length
settings for the tractor do not
match the size of the
continuous paper you are
using.
Check the page length settings for the
tractor using the printer’s default-
setting mode or the EPSON Remote!
utility. See “About Your Printer’s
Default Settings” on page 5-4 or
“Using the EPSON Remote! Utility”
on page 4-30.