7
Troubleshooting 7-3
R4C4620
Rev. C

A5 size TRBLE.FM

6/14/00 Pass 3
R
Proof Sign-off:
SEI Y.Ohkawara T.Takahashi
T.Takahashi
SEI M.Kauppi K.Blair
n = on,
f = flashing
••• = short series of beeps (three beeps)
•••••= long series of beeps (five beeps)
Note:
The printer beeps once if you press a control pa nel button when the corresponding
function is not available.
f Paper Out
n Pause
••• Continuous paper is not fed to the standby
position.
Tear off the printed document at the
perforation; then press the Load/Eject button.
The printer feeds the paper to the standb y
position. Press the Pause button to turn off the
Pause light.
••• A single sheet of paper is not fully ejected.
Press the Load/Eject button to eject the sheet.
Then press the Pause button to turn off the
Pause light, if necessary.
••• Paper is jammed in the printer.
Clear the paper jam as described on “Clearing
Paper Jams” on page 7-16.
f Pause – The print head is overheated.
Wait a few minutes; the printer resumes printing
automatically once the print head c ools.
f Paper Out
f Pause
f f Tear Off/Bin
f f f Font
An unknown printer error has occurred.
Turn off the printer and leave it off for several
minutes; then turn on the printer again. If the
error recurs, contact your dealer.
State of
panel lights
Beep
pattern
Problem
Solution