3-10 Printing on Single Sheets
R4C4620
Rev. C
A5 size SINGLE.FM
6/14/00 Pass 3
LProof Sign-off:
SEI Y.Ohkawara T.Takahashi
T.Takahashi
SEI M.Kauppi K.Blair
6. Insert a sheet of paper, printable side down, between the edge
guides until it meets resistance. The printer feeds the paper
automatically and is ready to print.
Note:
The time from when the paper is inserted until it feeds can be set
with the default-setting mode's Manual feed time. For instructions,
see “Changing default settings” on page 5-10.
7. Check the printer driver settings as described in Chapter 4,
and change them if necessary. Then send a print job to the
printer.
When the printer receives data, it prints the page and ejects it back
onto the paper guide. To continue printing your document,
remove the printed page and insert a new sheet of paper. If you
need to eject a sheet, press the Load/Eject button.
If the first line on your page appears too high or low, you can fix
this using the micro adjust feature. See “Adjusting the Top-of-
Form Position” on page 2-31.
cCaution:
Never use the knob to adjust the top-of-form position or eject a
sheet when the printer is on; this may damage the printer or cause
it to lose the top-of-form position.