Note:
If the Vink out light is flashing or on, you cannot clean the head, and this operation will start the ink cartridge replacement procedure. If you do not want to replace an ink cartridge at this moment, press the Tcleaning button to return the print head to its home position.
2. Hold down the Tcleaning button for three seconds.
5
The printer starts cleaning the print head and the Ppower light begins flashing.
cCaution:
This operation takes about one minute to complete. Never turn off the printer while the Ppower light is flashing.
3.When the Ppower light stops flashing, print a few lines from a document to confirm that the head is clean and to reset the cleaning cycle.
If the print quality does not improve, repeat step 2 and then print a few lines to check the output.
Maintenance and Transportation |