
Cause | What to do |
Margins are set incorrectly in your application.
Check that the margins are set correctly in your program. See “Printable area” in the Appendix.
The size of the paper loaded in the printer does not match the paper size setting within your application.
Load the correct size of paper, or change the paper size settings within your application to match the size of the paper you are using.
Cause | What to do |
The image resolution and the amount of color used in the document may be too high.
Carefully considering your use of color and resolution can help you optimize your printing times. For more details, see “Increasing the Print Speed” later in this chapter.
Note:High resolution printing and color printing significantly increase the amount of data to be processed. These two factors have the greatest effect on print speed.
Cause | What to do |
The T cleaning button was | The ink cartridge is low or out of ink. |
pressed while the V ink out | Replace the ink cartridge as described |
light was flashing or on. | on page |