❑Except as specifically explained in this guide do not attempt to service the printer yourself.

❑Unplug the printer and refer servicing to qualified service personnel under the following conditions:

If the power cord or plug is damaged; if liquid has entered the printer; if the printer has been dropped or the cabinet damaged; if the printer does not operate normally or exhibits a distinct change in performance. Adjust only those controls that are covered by the operating instructions.

❑If you plan to use the printer in Germany, observe the following:

To provide adequate short-circuit protection and over- current protection for this printer, the building installation must be protected by a 16 Amp circuit breaker.

Bei Anschluß des Druckers an die Stromversorgung muß sichergestellt werden, daß die Gebäudeinstallation mit einem 16 A-Überstromschalter abgesichert ist.

A few precautions

Even if you are familiar with other types of printers, be sure to read through the following list of precautions before operating your ink jet printer.

❑Do not put your hand inside the printer or touch the ink cartridge during printing.

❑Do not move the print head by hand; this may damage the printer.

2Safety Information