Making Detailed Adjustments 47
■3D Format
Use this setting to select the 3D format supported by your video device. In most cases, the
projector will correctly detect the 3D format when this option is set to Auto. You should
only select the 2D, Side by Side, or Top and Bottom formats when your projector
doesn’t properly display 3D images. See your video source documentation for
information on which mode to select.
■3D Depth
Adjust the slider to change the depth of the 3D effect.
■3D Brightness
Adjusts the brightness of 3D images. Select the Medium or High settings if the 3D
display is too dark.
■Diagonal Screen Size
Match this setting to the size of the projected 3D image to maximize the 3D effect and
the quality of the image.
■Inverse 3D Glasses
Reverses the timing for the left and right shutters on the 3D active shutter glasses. Only
enable this function if 3D images are not displaying correctly.
■3D Viewing Notice
Enables or disables the viewing notice that is displayed when 3D mode is activated.
Signal> 3D Setup > 3D Format
Signal> 3D Setup > 3D Depth
Signal> 3D Setup > 3D Brightness
Signal> 3D Setup > Diagonal Screen Size
Signal> 3D Setup > Inverse 3D Glasses
Signal> 3D Setup > 3D Viewing Notice