Epson 5020UB, 5020UBE Turning the Projector On and Off

Setting Up the Projector 23
2. Do one of the following:
■Plug the other end of the USB cable into the USB-to-AC adapter (PowerLite Home
Cinema 5020UB only), then connect the adapter to a wall outlet.
■Plug the other end of the USB cable into the 3D glasses charging port on the side of
the WirelessHD Transmitter (PowerLite Home Cinema 5020UBe only).
■Plug the other end of the USB cable into a computer or other device with an available
USB port.
Note: Epson does not guarantee the compatibility of the Epson RF 3D active shutter glasses
with computers or other devices.
Turning the Projector On and Off
Turning On the Projector
1. Turn on the power switch on the back of the projector.
2. Turn on any connected equipment you plan to use.