56 Making Detailed Adjustments
■Video Signal
Leave this setting on Auto so the projector can automatically interpret the format, such as
NTSC or PAL (for standard TV formats).
■Component
Change this setting to match the type of equipment connected to the Component port.
For component video, select Auto to let the projector automatically interpret the signal;
or select YCbCr or YPbPr to manually select your video equipment’s signal.
■Illumination
Turn off this setting to deactivate the lights on the projector’s Ppower button and power
light. Use this setting if you find the lights distracting in a darkened room.
■Sleep Mode
Turn off this setting if you don’t want the projector to enter sleep mode. (Sleep mode
shuts the projector off automatically when there is no video signal.)
Select 5min., 10min., or 30min. as the length of time before shutoff; decreasing the time
conserves power and extends the life of the lamp. 30min. is the default setting.
To turn the projector back on, press the Ppower button on the projector or the On
button on the remote control.
■Child Lock
Lets you lock the Ppower button on the projector’s control panel to make it more
difficult for a child to turn on the projector. See page 37 for more information.
■Control Panel Lock
Lets you disable all the buttons on the projector’s control panel to prevent the image from
being accidentally changed once it is adjusted. See page37 for more information.
Extended> Input Signal > Video Signal
Extended> Input Signal > Component
Extended> Operation > Illumina tion
Extended> Operation > Sleep Mode
Settings> Lock Setting > Child Lock
Settings> Lock Settings > Control Panel Lock