Additional Components

Depending on how you plan to use the projector, you may need additional components:

■To receive an S-Video signal, you need an S-Video cable. (One is usually provided with your video device.)

■To receive a component video signal from a VCR or other video device, you need a D-sub 15-pin to component video cable (available from EPSON; see page 7).

■To amplify your computer’s audio through the projector’s sound system, you need a computer audio cable (male-to-male 3.5-mm stereo miniplug cable). See your computer or electronics dealer to obtain this cable.

■Some older PowerBooks and Macintosh desktop models may need the Macintosh adapter set shown on page 71 (available from EPSON; see page 7). Older iMac systems may need a special adapter to provide a VGA output port; see your computer dealer.

■For a PowerBook or Macintosh desktop with a DVI output port, you’ll need to use a DVI to VGA adapter that may have come with your computer. See your Macintosh documentation for instructions.

6Welcome