Connecting a Component Video Cable
If your video source has component video connectors, you can use them to project a higher quality video image. You’ll need a component video to VGA cable, which can be purchased from EPSON (ELPKC19). See page 7.
Before starting, make sure the projector and your DVD player or other video device are turned off.
1.Connect the large end of the component video cable to the projector’s Computer/Component Video port.
2.Insert the three ends of the component video cable into the R, G, and B ports on your video source.
3.After you turn on the projector, use the Video menu to set the Input Signal to YCbCr or YPbPr. See page 34 for more information.
Setting Up the Projector 17