Changing Menu Settings

Use the buttons on the remote control to access the menus and change settings. Follow these steps:

1.Press the Menu button on the remote control to display the main menu screen:

 

 

 

 

 

 

 

 

 

 

Menu options

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Video

 

Position

 

Adjust

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Menus

 

 

 

 

Audio

Tracking

:

0000

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Setting

Sync .

:

0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Advanced

Brightness

:

0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

-

 

 

 

+

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

About

Contrast

:

0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

-

 

 

 

+

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Reset All

Sharpness

:

0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

-

 

 

 

+

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Color Mode

 

Select [Normal

]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Input Signal :

RGB

YUV( YCbCr

YPbPr)

 

 

 

 

 

 

 

 

Auto Setup :

ON

OFF

 

 

 

 

 

 

 

 

 

 

 

 

 

Reset

 

 

Execute

 

 

 

 

 

: Select : Enter

The menus are listed on the left, and the options available for the highlighted menu are shown on the right.

2.Press up or down on the directional (arrow) buttons to scroll through the menu list.

3.When the menu you want is highlighted, press the Enter button to select it. The highlight moves to the first option for that menu.

4.Use the directional buttons to scroll through the list of options. (If a computer or video source isn’t connected, certain options may be unavailable.)

5.Use the directional buttons and Enter button to change the setting for the selected option. Enabled settings have a green highlight.

6.Press the ESC button to return to the main menu. Your changes are saved automatically.

7.Press ESC again (or the Menu button) to exit the menu system.

Menu

Directional buttons

 

 

 

Power

 

Computer

S-Video/Video

Color Mode

 

Menu

A/V Mute

Freeze

E-Zoom

Enter

AutoESC

note

If you want to go back to the default settings on any menu, select Reset, press Enter, select Yes, and then press Enter.

Fine-tuning the Projector 33