Viewing Lamp Usage and Other Information
Use the About menu to view information about the display settings of your computer and the number of hours the lamp has been used.
1.Press the Menu button to display the main menu.
2.Use the Enter button to select About.
You see the lamp usage hours and computer display settings on the right:
Video |
| Lamp | : 0H |
| |
Audio |
| Reset Lamp Timer |
| Execute | |
Setting |
| Video Source | : Computer |
| |
Advanced |
| Input Signal | : RGB |
| |
About |
| Frequency | : H |
| |
Reset All |
|
| V | ||
|
| SYNC Polarity | : H |
| |
|
|
| V |
| |
|
| SYNC Mode | : |
| |
|
| Resolution | : |
| |
|
| Refresh Rate | : | ||
|
|
|
|
|
|
: Select | : Enter |
|
|
| |
The life span of the lamp is about 1500 hours. If the number shown is close to 1500, make sure you have a spare lamp handy.
3. When you’re finished, press ESC or Menu.
note
If you access the About menu when the projector display is set to video, you only see the lamp life and the video signal setting.
note
The lamp usage timer doesn’t register until you’ve used the lamp for at least 10 hours.