Epson 5 ModelOrgX Property

ModelOrgX Property

ModelOrgX Property

Applies To

Vision Objects: Correlation, Geometric

Description

A model has a fixed reference point by which we describe its location in an image. This point is referred to

as the model origin. The ModelOrgX property contains the X coordinate value of the model origin.

Usage

VGet Sequence.Object.ModelOrgX, var

VSet Sequence.Object.ModelOrgX, value

Sequence Name of a sequence or string variable containing a sequence name.

Object Name of an object or string variable containing an object name. The object must exist in the

specified sequence.

var Integer variable that will contain the value of the property.

value Integer expression for the new value of the property.

Values

The ModelOrgX property can be set between 1-255 because the model window is limited in the X direction

to 255 pixels. It should be noted that the ModelOrgX defines the X coordinate of the model origin with

respect to the model's upper left corner.

Default: The model origin is placed in the center of the model window when a new object is created.

Remarks

The model origin may lie anywhere within the model window Region. The origin's coordinates define the

model origin relative to the model's upper left corner, that is, relative to the location of element [0][0] of the

image that defines the model.

When you create a new Correlation, the model origin is set to the center of the model window. However,

the user may modify this position by typing in a new X and Y positions into the ModelOrgX and

ModelOrgY Properties or by simply clicking on the model origin (the crosshair shown in the middle of the

model window) and moving it to the position desired.

The user can also modify the model origin automatically by setting the ModelOrgAutoCenter property to

True. If the ModelOrgAutoCenter property is set to True then the model origin is automatically set to the

center of the model window.

If the ModelOrgAutoCenter property is set to True, the ModelOrgX property cannot be used to reposition

the model origin.

)

NOTE