If you can’t connect the projector’s computer cable to your Macintosh, you may need to use a Macintosh adapter (available from Apple).

■Remove the small cover on the Macintosh adapter and set its DIP

switches according to the resolution you want to use (such as 16-inch mode). See your Macintosh documentation for instructions.

■ Connect the small end of the Macintosh adapter to the computer cable.

■ Connect the computer cable (with the Macintosh adapter attached) to the monitor port on your Macintosh.

4. Tighten the screws on all the connectors.

If you don’t need to make any other connections, you can plug in your projector and turn it on. See page 14 for instructions.

12Connecting to a Desktop Computer