note
The projector’s image source must be set to Video, and the video source (such as a VCR or camcorder) must be connected and operating for you to access these menu options. For example, the projector must actually be projecting the image from your video tape if you’re using a VCR.
Video Menu (Video Image Source)
The Video menu lets you make adjustments to the projected image. The following options are available when the image source is Video.
Menu item | Description |
|
|
Position | Use the Enter button to move the screen |
| position in the corresponding direction. |
| When you finish making adjustments, press the |
| Esc button. |
|
|
Brightness | Lightens or darkens the overall image. Increase |
| brightness to lighten an image, or decrease it to |
| darken the image. |
|
|
Contrast | Adjusts the degree of difference between light |
| and dark areas. Increase the contrast to make |
| light areas lighter and dark areas darker. |
| Decrease it to minimize the difference between |
| the lightest and darkest areas of the image. |
|
|
Color | Adjusts color density. Increase the setting for |
| darker and more opaque colors. Decrease it for |
| lighter and less opaque colors. |
|
|
Tint | Adjusts the |
(NTSC only) | screen. Increase tint to add more green, or |
| decrease it to add more red. |
|
|
Sharpness | Adjusts the sharpness of the screen image. |
|
|
Gamma | Adjusts the projected image for natural |
| coloration. |
|
|
Mode | Specifies the image signal mode: Auto, NTSC, |
| NTSC4.43, PAL, |
| SECAM. |
|
|
Reset | Returns all menu items to their initial factory |
| defaults. |
|
|
22Using the Projector Menus