warning
Never look into the lens when the lamp is on. This can damage your eyes, and is especially dangerous for children.
3.Use the tab on the lens ring to rotate the ring and pop out the lens.
tab
4.Squeeze the lens cap tabs and remove the lens cap.
Squeeze here
5. Press the red Power button on top of the projector.
power button
power light
The power light flashes green, and then stays on. You may see a blue screen with the message No Signal displayed. This is normal.
6.Turn on or restart your computer. In a few moments, you should see the computer display projected.
Connecting to a Desktop Computer 15