Video Menu (Computer Image Source)
note
Some options are limited to being enabled (turned on) or disabled (turned off).
The computer must be connected and operating, and the image source on the projector must be set to Computer for you to access these menu options.
The Video menu lets you make adjustments to the projected image. The following options are available when the image source is your computer.
Menu item | Description |
|
|
Position | Use the Enter button to move the screen |
| position in the corresponding direction. |
| When you finish making adjustments, press the |
| Esc button. |
|
|
Tracking | Matches the projector’s internal clock to |
| various computer graphic signals. Adjust this |
| setting to remove vertical lines from the image. |
|
|
Sync | Synchronizes with the tracking signal sent from |
| the computer. Adjust this setting to correct |
| fuzziness or screen flicker. |
|
|
Brightness | Lightens or darkens the overall image. Increase |
| brightness to lighten an image, or decrease it to |
| darken the image. |
|
|
Contrast | Adjusts the difference between light and dark |
| areas. Increase the contrast to make light areas |
| lighter and dark areas darker. Decrease it to |
| minimize the difference between light and dark |
| areas. |
|
|
20Using the Projector Menus