1Slide the removable paper stop off the left end of the spindle.

To use a 3-inch roll paper core, attach the gray adapters to the paper stops at each end. See your Printer Guide for details.

2Position the roll paper as shown, then slide it onto the spindle.

3Slide the removable paper stop back onto the spindle and insert it firmly into the end of the roll.

4Open the roll paper cover on the printer.

5Place the roll paper in the printer as shown. (The white end of the spindle goes on the right.)

6Make sure the printer is turned on, then press the

Paper Source button until the Roll Auto Cut light comes on.

To avoid feeding excess paper, make sure you don’t select Sheet when you’re using roll paper.

1

7Move the paper lever to the released position.

8Feed the paper into the slot and pull it all the way through.

9 Turn the roll back to remove any slack. Then align the bottom edge of the paper with the row of holes, as shown.

10Return the paper lever to the locked position, then close the roll paper cover.

11Press the Pause button. The paper feeds into the printing position automatically and READY appears on the control panel.