4Open the front cover. (The cover has special tabs that act as paper supports when the cover is open.)
5Feed the posterboard into the paper slot until it meets resistance.
If you’re using stock more than 39 inches long, load it long edge first (in landscape orientation).
6Align the board with the scale on the roll paper cover.
7Return the paper lever to the locked position. Then close the front cover.
8Press the Pause button. The board feeds into the printing position automatically and READY appears on the control panel.
9Run your print job. After it is finished, the posterboard stays in the printer.
10To remove the print, hold it and push the paper lever back to the released position.
To avoid damaging the printer, never move the paper lever during printing, or while the Operate or Pause light is flashing.
3