4

Chapter 1: Overview

This manual covers the assembly and initial adjustments of the JetPlate 7600 and JetProof 7600.

•Space requirements for Jetplate & Proofer (optional)

•UV Light restrictions

•Setup JetPlate

1.Assembling the JetPlate

2.Nozzle Check and Alignment

3.Installing PrintPlate

4.Platen and Cover Installation

5.Flushing and Charging Process

•Setup the Proofer (optional)

•Installing the JetPlate Rip 8.0.4

Space Requirements for JetPlate & Proofer

•The JetPlate requires a sturdy table surface at least 4' by 2.5' with a height of 30”.

•You will need to have enough free floor space to the right of the table so that you can stand there while positioning the input platen.

•The Epson 7600 Proofer Printer has an optional stand, recommended.

•Both units should be close enough to your computer to connect the JetPlate 7600 and/or Proofer with the twelve-foot cables that are shipped with your JetPlate system.

All Trademarks used in this document are the properties of their respective owners.

Rev. 1.3 4/6/2004