S-Video
Connecting an S-Video Source

If your video source has an S-Video jack, you can use it to project a higher quality video image. You’ll need an S-Video cable, which is usually provided with your video source, or you can purchase one from Epson (part number ELPSV01). See page 13 for ordering information.

Before starting, make sure the projector and your DVD player or other video source are turned off.

1.Insert one end of the S-Video cable into the projector’s S-Videoport and the other end into the S-Video output port of your video source.

2.To play sound through the projector, follow the instructions beginning on page 29.

If you don’t need to make any other connections, you can plug in your projector and turn it on. See page 32 for instructions.

If more than one device is connected to the projector, select the correct source after projection starts by pressing the Source Search

button on the projector or the button on the remote control. See page 34.

26Setting Up the Projector