Epson 76c Solving Problems with the Image or Sound

Solving Problems with the Image or Sound

No image appears on the screen.

■Check that the power light is green, not flashing, and the lens cap is off.

■The projector may be in standby or sleep mode. If the projector has not received any input signal for 30 minutes, it turns off the lamp to conserve the lamp life and save energy. If the power light is orange, press the P Power button to turn the projector on.

■Press the A/V Mute button to make sure the picture has not been turned off temporarily.

■If the power was switched off and then on again, wait until the power light stops flashing and remains orange; then press the P Power button again.

■Check the Video Signal or Computer Input setting in the Signal menu to make sure it is correct for the selected source. See page 56 for more information.

■Have messages been turned off in the Display setting of the Extended menu? See page 60 for details.

■Adjust the Brightness setting on the Image menu or select High for the Brightness Control setting in the Extended menu. See page 54 or page 59.

■The attached computer may be in sleep mode or displaying a black screen saver. Try pressing a key on the computer.

Nothing appears on the external monitor.

■Make sure the VGA computer cable is connected to your computer’s video port and the projector’s Computer(Component Video) port. Make sure the cable from your monitor is connected to the projector’s Monitor Out port.

Solving Problems 83