Replacing the Lamp

The projection lamp typically lasts for about 2000 hours of use

(in high brightness mode) or 3000 hours (in low brightness mode). It is time to replace the lamp when:

■The projected image gets darker or starts to deteriorate.

■The lamp light is flashing orange.

■The message Replace the Lamp appears on the screen when the lamp comes on. To maintain projector brightness and image quality, replace the lamp as soon as possible.

Contact your dealer or call Epson at (800) 873-7766 in the United States for a replacement lamp. Request part number V13H010L34. In Canada, please call (800) 463-7766 to locate a dealer.

Follow these steps to replace the lamp:

1.Press the P Power button twice to turn off the projector. When you hear the projector beep twice, unplug the power cord.

2.If the projector has been on, allow it to cool down for at least an hour (or until the lamp is cool).

3.Use the screwdriver included with the replacement lamp to loosen the screw holding the lamp cover (the lamp cover is located on top of the projector).

4.Slide the cover out, then lift it off.

note

You can check to see how many hours the lamp has been used. See page 62.

Turn off this product when not in use to prolong the life of the projector.

warning

Let the lamp cool before replacing it. If the lamp breaks, handle the shards carefully to avoid injury.

Maintaining and Transporting the Projector 75