■Projection
Front: Projector is in front of the screen.
Front/Ceiling: Projector is in front of the screen, mounted
Rear: Projector is behind the screen.
Rear/Ceiling: Projector is behind the screen, mounted
■Operation
Direct Power: When this feature is enabled, projection starts as soon as you plug in the power cord. You don’t have to press the P Power button.
Sleep Mode: When Sleep Mode is on, the projector turns off the lamp if it has not received any input signals for 30 minutes.
High Altitude Mode: When using the projector at an altitude above 4,921 feet, turn this setting on to ensure that the internal temperature of the projector is regulated properly. Turn this setting off for lower elevations.
■Link 21L
Turn this setting on only if you’re controlling the projector from a computer with the EMP Link 21L software. This software can be downloaded from the Epson website at support.epson.com. (You must turn the projector off and then on again to use the new setting.)
■Language
Select the language to be used for the projector menus.
4.When you’re finished, press Esc or Menu.
note
When Direct Power is turned on, press the
PPower button to turn the projector off, wait until the Ppower light turns a steady orange, then unplug the power cord.